RANGE DAY

For most of us, a day at the range is just plain fun. Sure, most of us have an agenda: Improve skills, group loads for accuracy, check zero for an upcoming hunt.

By

Craig Boddington

For most of us, a day at the range is just plain fun. Sure, most of us have an agenda: Improve skills, group loads for accuracy, check zero for an upcoming hunt. For some, banging away is pure pleasure, because shooting is fun. It’s fun for me, too; I go to the range for all those reasons.

Range Day starts with loading the truck…and making darned sure nothing that might—possibly—be needed is left behind.

And more, because range day is also serious work. As a gunwriter, I’m always fighting (and juggling) deadlines. Some articles are hunting stories. Others are gun stories, and many, with hunting guns, are a mix. Whichever, range time is important, and precious.

Reasonable weather is almost essential, a big problem in many parts of the country, sometimes impossible on winter days in Kansas. I’m often asked why we haven’t pulled out of California completely. Grand-kids are good reasons, and I often cite the year-around hog hunting that I love. Range days are more good reasons. The range I use, on a friend’s ranch not far from town, is up a deep canyon, cold in winter and blistering hot in summer, but protected from most winds. Except for infrequent rainy days, I can shoot in at least marginal comfort throughout the year. Honest, the ability to get in a range day almost any time I need to has much to do with how I’ve been as prolific and productive as a gunwriter all these years.

Boddington prefers to clean at the range…which means cleaning gear must be hauled. Usually shooting multiple calibers, he brings his full cleaning kit, ensuring he has all the brushes, jags, and patches needed.

Now, it isn’t like stepping out the back door and shooting, as I can do at the Kansas farm (when weather allows). The range is too far from the house to run back and forth. I have to be organized, and make sure I have everything I need.

Often, I take a half-dozen firearms to the range. A couple I need to run through their paces for articles. Always, a .22 to practice with while barrels are cooling. Maybe a favorite hunting rifle to check zero, or to group a new handload recipe. At least one pistol or revolver, just to keep my hand in. Oh, sure, I’ve gotten to the range and realized I forgot to grab ammo for one or another, or maybe I forgot a spare scope in case I want to make a switch.

Boddington’s “range” tool kit is small and simple, including a small set of gunsmithing screwdrivers and bits, and multi-tools.

If I forget something for a gun I need to write about, that’s an expensive waste of time. So, I try to be organized. I make lists—guns, ammo, gear—and I check them off while I’m loading the truck. As for gear, I don’t need to haul everything. We have a little range house that holds targets, rests for the bench, shooting sticks, staple gun with lots of staples.

RANGE BAG

Most of what I need to bring stays in my Range Bag. Hunting buddy Gordon Marsh, proprietor of this site, and our mutual friend, Bill Green, spent a lot of time creating the “Boddington Gear” (www.boddingtongear.com) you’ll find on this site: Soft gun cases, range bags, and more. Available in good waxed cotton and excellent buffalo leather, I’m really happy with these products. The real point is: A great deal of thought went into the design.

The Boddington Gear range bag, available in buffalo leather or waxed cotton, is roomy enough to hold almost anything needed, including range spotting scope with bench tripod.

Good soft cases are essential to protect and safely transport valuable firearms, but my writing business truly depends on the range bag. I designed it large, because I haul a lot of stuff back and forth to the range. Side and end pockets are roomy enough to hold handguns in rugs…and a staple gun. I carry a spare in the range bag, ‘cause I’ve had them quit just when I needed to change targets.

Most of us who care about accuracy save targets, either to compare or brag about. I’m big on this, because when testing firearms, I have protocols to meet, as in “five five-shot groups with multiple loads.” I must save targets, so I can measure groups and photograph them later. I have two options. The range bag has a built-in file folder, not just for targets, but for instructions and other printed info. And, I have my buffalo leather target case, a cylindrical tube that allows me to roll up targets and save them with no damage. (Don’t save targets? It’s also a perfect fit for a straight-ocular-lens spotting scope.)

Good soft cases are essential for transporting and protecting valuable firearms. Boddington put a lot of thought into his soft gun cases and likes the results.

Now, regardless of what range bag you prefer, here’s the stuff I cram into mine for almost every range day. A small set of gunsmith tools, so I can tighten up screws or switch out an optic on the range as needed. A PAST recoil shield, used religiously for shooting off the bench with almost anything from .30-caliber up. Our Marine Corps mantra was: “Pain is good. Extreme pain is extremely good.” Sorry, but we shoot better when recoil doesn’t hurt, so at the bench I sissy up. Light, beanbag sandbags, so I can get my benchrest support exactly right. Also, a big leather “competition” shooting glove for the supporting hand. In my case, the right hand, because I’m left-handed. I use it on the bench, and in prone, to snuggle the butt against my shoulder, and to make fine elevation adjustments, keeps the rear sling swivel stud from barking my hand.

Naturally, shooting glasses and earmuffs! A spare left-hand strap on cheekpiece so, as needed, I can get the cheek-weld just right, often essential with unfamiliar test rifles, especially with today’s ever-larger scopes that must be mounted higher. And, down deep in one of the pockets, spare batteries—for any device you carry that might need a battery!

On the range with the MagnetoSpeed chronograph, measuring bullet speed with electromagnetic impulses. This is it; the case is underneath the monitor. Light, compact, fast to assemble and easy to use, this chronograph lives in the range bag, and can be taken anywhere.

Since part of my range days involve “test guns,” I carry a digital trigger pull gauge. Mine is from Lyman, stores multiple tests and yields the average. A chronograph is another essential device, invaluable for handloaders and long-range shooters, and a required work tool for me. The Oehler 35P has long been the gold standard; I’ve had one for 40 years, love it because it yields all needed data on a printout. However, the Oehler is bulky, stores in its own separate hard gun case, and takes time to set up. A few years back, I got a Crony, compact and easy to use, range-bag compatible. My buddy, who owns the ranch and thus the range, also has a Crony, keeps his in the range house, so it’s available on that range. The Oehler and Crony operate off skyscreens, detecting the passage of the bullet. The Oehler is absolutely accurate, but skyscreens are finicky in some light conditions.

The range Boddington uses most frequently has various rest options for the bench, but he keeps several lightweight “beanbag” sandbags in his range bag so he can adjust for a perfectly steady rest.

Recently, I got a MagnetoSpeed, measuring speed with electromagnetic sensors. The MagnetoSpeed Sporter now lives in my range bag. Inexpensive, weighs little over a pound, and folds up into its 12×3-inch case, about the size of a cigarette carton. It attaches to the barrel in seconds, stores up to 12 shots in a string, and yields High. Low, Average, Extreme Spread (ES), and Standard Deviation (SD). Mostly a rifle guy, MagnetoSpeed does almost everything I need, and can even go on hunts, to verify velocity and thus long-range data as atmospherics change.

EXTRAS

Note that I said “almost.” MagnetoSpeed cannot be used with suppressors. And, since it attaches to the barrel, is not compatible with semiauto pistols with full-length slides. I just ordered a LabRadar, awesome device, measuring speed with Doppler radar. It will work on almost anything…except shotguns (multiple pellets confuse the radar).

Although fairly compact, LabRadar is a bit large for my range bag, so I’ll carry it separately when I need it. That’s not the only thing I carry separately. My camera(s) go in my daypack, along with binocular, or in a camera bag. The range spotting scope has a small tripod that fits handily in the bag, but if I intend to do some “setup” shots, I take a tripod for camera use.

Boddington keeps a PAST recoil shield in his range bag, and also carries an extra strap-on cheekpiece, invaluable for adjusting comb height…especially with the larger scopes used today, which must be mounted higher.

I like to clean at the range, either when finished, or between series of groups. For most of us, the range bag easily holds a jointed rod and everything else, but since I’m usually hauling multiple firearms in various calibers, I usually throw in my big Tipton cleaning set, about the size of a large toolbox. If I have it, I know I have all the right-size brushes and jags.

Most of us have calm, relatively focused range sessions with just a couple of firearms. The range bag probably has adequate room for all the ammunition needed, but my life doesn’t work that way. On my range days, I may have firearms chambered to a half-dozen different cartridges…with multiple loads for each. I put all my ammo in a separate box or bag, so I can keep it sorted, use one at a time…and then put back when I’m finished with that firearm. However you do it, there’s one cardinal rule: Just one caliber/cartridge on the bench at any time!

THE SHORT, FAT CARTRIDGE

Creating a new cartridge is complex and expensive; it is simpler and cheaper to modify existing cases. Performance characteristics can be changed by necking the case up or down, changing shoulder angle and body taper, and by shortening or lengthening the case. Such modifications create “families” of cartridges based on a parent case.

By

Craig Boddington

Creating a new cartridge is complex and expensive; it is simpler and cheaper to modify existing cases. Performance characteristics can be changed by necking the case up or down, changing shoulder angle and body taper, and by shortening or lengthening the case. Such modifications create “families” of cartridges based on a parent case.

This awesome group was fired from a .300 WSM when the cartridge was first introduced. Short, fat case design is conducive to accuracy, but good barrels and consistent ammo is more important. The short, fat concept is really more about efficiency

Peter Paul Mauser created an extensive family of cartridges based on his 1888 7.92x57mm cartridge. Our .30-06 has a longer case, but rim and base diameter are suspiciously similar to Mauser’s case. (Actually, our 1903 Springfield action was so similar to the Mauser that Uncle Sam paid Mauser a royalty until WWI.) To this day, the majority of unbelted rimless cartridges are based on the .30-06’s .473-inch rim and base diameter. These include .270, .35 Whelen, and Hornady’s 6.5mm (and 6mm) Creedmoor.

Since its introduction in 1912, the .375 H&H Magnum case, with .532-inch rim and belt, has served as the parent for almost all belted cartridges. The only exceptions have been Weatherby’s smallest cartridges (.224 and .240 Wby Mag); and their largest cartridges, based on the big .378 Wby Mag with .582-inch rim and belt.

Proving that short and fat isn’t everything and extreme velocity can produce accuracy, this group was fired with a Lazzeroni 7.82 (.308) Warbird, 4000 fps with a 130-grain Barnes X bullet.

Earlier cartridges tended to have a lot of body taper and gently sloping shoulders. With new smokeless powder pressures, both features were thought essential for smoother feeding and reliable extraction. One of the most archaic of all case designs still around is the .300 H&H. Introduced in 1925 by necking down the .375 H&H case, the .300 uses the full 2.850-inch case, lots of body taper, and a long, gentle 8.5-degree shoulder. From today’s perspective, we reckon there’s no way it will shoot well or fast. Except it does both. The .300 H&H became popular when Ben Comfort used it to win the 1000-yard Wimbledon match in 1935. With good handloads, velocity is surprising, and that long, tapered case literally flies into the chamber.

 Boddington took this javelina in 2002 with a .243 WSSM, when the WSSM cartridges were introduced. Fast and efficient, they do what they’re supposed to do, but didn’t become popular and have nearly vanished…perhaps because of feeding issues in many platforms.

By this time, gun tinkerers had discovered that powder capacity and efficiency could be enhanced by removing body taper and sharpening shoulder angle…with little impact on feeding and extraction. The resulting non-standard cartridges were called “wildcats.” P.O Ackley (1903-1989) was one of the most prolific experimenters. He messed with every known case and bullet diameter but, rather than reinvent the wheel, his cartridges were mostly “improved” by removing body taper and sharpening shoulder angle, thus increasing velocity.

Ackley’s rule for an “improved” cartridge: Standard factory ammo could still be used, the result a fire-formed case. The .280 Ackley Improved has been his most popular, now loaded by several companies. Based on the .280 Remington with sharp 40-degree shoulder, the .280 AI duplicates 7mm Rem Mag performance, but in a more compact case while burning less powder.

In the 1990s John Lazzeroni got the majors thinking with his fat-cased Lazzeroni Magnums. His long cartridges are perhaps best-known, but it was his short, fat cartridges that got things going. Left to right: 7.21 (.284) Spitfire; 7.82 (.308) Patriot; 10.57 (.416 Maverick).

Roy E. Weatherby (1910-1988) also started as a wildcatter. Weatherby’s initial cartridges were based on the .300 or .375 H&H case, necked this way and that, sometimes shortened, always with body taper removed to increase powder capacity and velocity. His flagship cartridge, the .300 Wby Mag, wasn’t the first but, since it used the full-length case, it was essentially just one of various “improved” versions of the .300 H&H. The Weatherby difference is Roy’s distinctively curved “double Venturi” shoulder. The effect of this is still debated but, for sure, the Weatherby Magnums were, by bullet diameter, the fastest cartridges out there.

Boddington and noted Ruger collector Lee Newton with a fine Kansas whitetail, taken with Ruger No. One in .280 Ackley Improved. The most popular of P.O. Ackley’s many cartridge designs, his .280 AI has become extremely popular.

In fact, the only the way to get higher velocities is to use a bigger case. Problem is, you quickly get into over bore capacity. This can be likened to a water hose. A hose can only pass so much water. You can increase pressure, but at some point you reach diminishing returns and not much more water comes out of the hose. In a rifle barrel, that point of diminishing return is over bore capacity. You can use a bigger case and burn more propellant, but you can’t get much more velocity. You’ll start to see this with unburned granules of powder spewed in front of the muzzle, but the real problem is throat erosion and reduced barrel life.

So long as we use nitrocellulose-based propellants, we can’t get much faster than Weatherby’s 1940s velocities. Nitrocellulose expands (burns) at about 5000 fps. This sets a practical limit, but you can’t get there because of friction. The .220 Swift broke 4000 fps in 1935. To this day, only a handful of commercial cartridges exceed 4000 fps, none by much, and all with short barrel life.

Boddington took this javelina in 2002 with a .243 WSSM, when the WSSM cartridges were introduced. Fast and efficient, they do what they’re supposed to do, but didn’t become popular and have nearly vanished…perhaps because of feeding issues in many platforms.

So, no matter how much superheated gas you pour down your barrel, unprecedented velocity is not the result. You can, instead, go for efficiency, and that’s a primary concept behind today’s short, fat cartridges. We learned from tank cannons that burning efficiency is achieved when the primer flame can access a greater percentage of the propellant charge. Burning efficiency is conducive to accuracy. More important: More energy per grain of powder burned. For instance, with a 180-grain bullet, the .300 Wby Mag needs 70.9 grains of IMR4350 powder to reach 2900 fps. The .300 WSM needs just 62.1 grains of the same powder. That’s ten percent more propellant—more heat, more recoil—to reach the same result.

The .308 Win is based on the .30-06 case shortened from 2.494 inches to 2.015 inches. At some point case capacity tells; the .308 is not as fast as the .30-06. However, it’s only about seven percent slower…while burning 20 percent less propellant.

For sheer efficiency, the perfect cartridge case is as wide at the base as it is long. No such cartridge exists because no known action can feed such a thing. However, there are fatter cartridge cases. A longtime favorite has been the .404 Jeffery case, an unbelted rimless cartridge with a .543-inch rim and base. The .416 Rigby case is even fatter, with a .590 rim and base.

Hornady’s growing PRC family, all based on the .375 Ruger case. Left, the just-released 7mm PRC, case shortened to house the longest bullets in standard actions. Center, the original 6.5 PRC, suitable for short actions. Right, the .300 PRC, possibly suitable for standard actions, but requiring a full-length action for the longest .308 bullets currently in use.

In the late Eighties Tucson wildcatter John Lazzeroni started developing fat-cased wildcat cartridges, creating parallel lines of long and short-cased Lazzeroni Magnums. Most use similar dimensions to the .416 Rigby, but some use the .404 Jeffery. As Roy Weatherby did in the 1940s, Lazzeroni made the big boys nervous.

Manufacturers liked the concept and the performance, but most production bolt-actions cannot house the big Rigby case. So, the big boys did their own things. Remington struck first with the long Remington Ultra Mags, based on the .404 Jeffery case. First the .300 RUM in 1998, then 7mm, .338, and .375 RUM two years later. Good and fast cartridges, all needing .375 H&H-length actions. Winchester struck back with the .300 Winchester Short Magnum, 2.1-inch case for short actions. The RUMs have a .550 base, with the rim slightly rebated to .534. Winchester’s WSM case is similar, but not the same: .555-inch base, rim rebated .535.

Remington quickly added 7mm and .300 Remington Short Action Ultra Mags, sized to fit their little Model Seven action. Soon we had four RUMs, two RSAUMs, and four WSMs…plus three Winchester Super Short Magnums (WSSMs). To my thinking, this was a large and confusing array of new cartridges. The .300 WSM has become the most popular, but several of these cartridges are languishing and the WSSMs vanished quickly. The short, fat cartridges are efficient, but remember my comment about actions for the ideal “triangular” cartridge?  All the short, fat cartridges show feeding issues in some platforms, and I believe this is what killed the WSSMs, too short and fat for many actions.

: This huge feral hog was taken with a Lazzeroni 10.59 (.416) Maverick. Maybe too much gun, but the proprietary Lazzeroni short magnums are still the fastest in their class.

In 2007 Hornady introduced the .375 Ruger. It was successful, but its case design is brilliant: .532-inch rim and base, same as the rim and belt of the .375 H&H but, absent belt, more case capacity. Also, easy to manufacture: Same bolt face as a belted magnum, and untroubled feeding in most actions.

The .375 Ruger case quickly spawned the .416 Ruger and, shortened, .300 and .338 Ruger Compact Magnums (RCMs). These have not been especially popular, but recently, the .375 Ruger case was used for Hornady’s PRC (Precision Rifle Cartridges). Specified for faster-twist barrels and intended for use with modern extra-heavy, extra-long, super-aerodynamic bullets, there are now three PRCs: 6.5, .300, and the just-released 7mm PRC. 

The three PRCs are designed for maximum efficiency and to avoid over bore capacity. Interestingly, case lengths are different. 6.5 PRC is a short-action cartridge. .300 PRC uses the full (2.5-inch) .375 Ruger case. With the longest and heaviest bullets, it really needs a full-length action. The 7mm PRC splits the difference with a 2.280-inch case, allowing it to be housed in standard (.30-06) actions with extra-heavy 180-grain 7mm bullets.

Nosler cartridges: The Nosler family of cartridges, now 26, 27, 28, 33, and 35 Nosler, are all based on the RUM/.404 Jeffery case. The 26 (6.5mm) Nosler was first. So far, the 28 (7mm) Nosler has been most popular, now loaded by multiple major manufacturers.

The PRCs aren’t alone in being specific to actions lengths and bullets. Starting in 2012 with the 26 Nosler, Nosler’s family has now grown to five siblings: 26, 27, 28, 30, and 35 Nosler, all based on the RUM (.404 Jeffery) case shortened to 2.5 inches. all intended as standard-length-action cartridges. Most popular so far has been the 28 Nosler, calling for faster rifling twist, and now loaded by multiple manufacturers,

Winchester’s 6.8 Western takes a different approach. Based on the .270 WSM case shortened, it is designed for short actions, so is sort of an extension of the WSM family. Except: It calls for fast-twist barrels, and is designed for the new, extra-heavy .277 bullets up to 175 grains.

In 2022, the somewhat fatter (and sometimes short) case is still in vogue, but current cartridge design is more specific to actions, bullets, and rifling twists than ever before.

WHY LEFT-HAND GUNS MATTER

By

Craig Boddington

If you’re of the right-handed majority, they probably don’t matter much to you at all, but I want you bear with me and give this some thought.

One of my all-time favorite “crazy” letters went something like this: “Boddington, I’m sick of hearing you whine about scarcity of left-handed firearms. You should blame your mother; she should have made you right-handed like normal people…I can assure you, if you were born in Germany in the 1930s you’d be shooting right-handed.”

Any question about which eye is dominant? Perform this simple test, sighting on a small object and closing one eye, then the other. At 65, left-handed and long left-eye dominant Boddington was shocked to learn that his eye dominance had shifted to the right eye!

Nobody knows the exact percentage of left-handed people, but we’re a small minority, estimated between 10 and maximum 15 percent. Not all manufacturers offer left-handed models. Most that do offer limited variations and chamberings but, compared to when I was young, today there’s a pretty good selection. Honest, if were a firearms manufacturer, I’m not certain I’d tool up for the left-handed market. Partly because it’s small, and also because many lefties don’t buy left-handed guns. They make do with right-handed guns…like always.

For centuries, lefties were forced to be right-handed, too awkward for tactics with swords and shields. I’m not sure when our military allowed left-handed shooters, but I trained as a lefty 50 years ago. Whether you consider preference for the southpaw side natural or an abomination, there are other considerations.

: Veteran gunwriter John Wootters and Boddington with a nice Rio Grande turkey gobbler. Lifelong right-hander Wootters lost his right eye to a detached retina. He successfully made the shift to left-handed shooting but, in his 60s then, it wasn’t easy.

 In addition to physically favoring one side, most humans have a stronger or dominant eye. Unlike many activities that rely heavily on our binocular vision, shooting (especially with sights), requires aiming with just one eye. For most people, it’s easier to learn to shoot with the dominant eye.  Eye dominance often follows hand preference…but not always. As toddlers, we announce “handedness” by reaching for toys and spoons with one hand or the other. This may be established before eye dominance is determined.

Handgunning is different. Almost all semiautos eject to the right, not a problem at arms’ length, and revolvers are ambidextrous. That arms’ length distance also offers multiple options for solving cross-eye dominance.

Cross-eye dominance (right-handed, but with left eye dominant; or vice-versa) is not uncommon. Interestingly, cross-eye dominance is more common among women than men, with some studies showing a significant percentage of cross-eye dominance in females. Not a problem in many sports, but a big deal in archery and shooting. Especially today, with women forming the fastest-growing segments in almost all shooting sports.

So, you are right-handed and right-eye dominant. You don’t care. Fine, but as the kids and ladies in your life learn to shoot, are you sure they’re starting out on the proper side? There are simple remedies to improve shooting with cross-eye dominance but, from learning to shoot is faster with the dominant eye. The shooting shoulder and trigger hand should be on that side.

TESTING EYE DOMINANCE

Easiest thing in the world. In a large room, pick out a small object like a light switch. Stand with arms outstretched, palms away. Bring your hands together, overlapping fingers and thumbs so that you create a small hole between the webs of your thumbs. Focus on the object through the hole and close one eye. If the object remains stationary, your open eye is dominant. Without moving your head, close both eyes and open the other eye. The object should jump, either out of view behind your hand or to the side. That is not your dominant eye!

Springfield LH conversion: Before LH actions were common, bolt-actions were often converted, switching the bolt handle and reversing bolt rotation. This is a converted Springfield by R.F. Sedgely, fast to operate, but the shooter’s face remains in peril if there’s a catastrophic failure. Mirror-image actions that eject to the left are much safer!

Stuff happens. I’ve been left-handed and left-eye dominant most of my life, but our eyes change as we age. About five years ago, I started having trouble resolving iron sights and shotgun ribs. Worse than that: I was clearly seeing two front sights and front beads. I was shocked to discover my eye dominance had shifted from left to right…no wonder I was having trouble! Prescription shooting glasses have mostly fixed the problem so, no, I’m not switching from left to right, too much muscle memory and too many left-handed guns.

Injuries are impartial. Forty years ago, when lefty actions where scarce, I bought two of my first from a lefty in the local Safari Club who had lost his left eye and needed to switch sides. John Wootters, great gunwriter and friend, was right-handed all his life…until he lost sight in his right eye to detached retina. In his 60s, the transition to left-hand shooting wasn’t easy, but it can be done. Likewise, injuries to the strong-side hand, arm, or shoulder can force shooters to switch.

Ruger No. One buffalo: Cartridge selection is a problem with most left-hand rifles. The Ruger No. One has been chambered to more cartridges than any other factory rifle, and is totally ambidextrous. Left-handed Donna Boddington used a No. One in .450/.400-3” to take this awesome Zimbabwe buffalo.

A MATTER OF SAFETY

Most right-handers probably believe that left-handed guns are for convenience or speed. Suck it up, right? No. It’s really a matter of safety. It is a right-handed world, so most repeating actions are designed to eject to the right. And, in the case of a catastrophic failure, like a ruptured case head, the hot gases and shrapnel are directed to the right, away from the right-handed shooter’s face and eyes.

Now, put that right-hand-ejecting longarm on the left shoulder and experience the same catastrophe. Now the bad stuff is vented straight into the shooter’s face; serious injury is almost unavoidable.

Rock River LH AR: Boddington taking a field rest for prairie dogs with a mirror-image AR from Rock River. There are now several manufacturers offering left-hand ARs, far the safest and most pleasant-shooting for lefties.

Many firearms are more or less ambidextrous in operation, including most lever-actions, pumps, and semiautos.  However, if ejection is to the right side, the same safety hazard exists. And, vice versa, it also exists in the rarer cases of right-handers shooting mirror-image left-hand firearms.

There are truly ambidextrous actions. All break-open actions, most single-shots, and top-eject lever-actions are even-handed, and bottom-ejecting slide-actions and semiautos are totally ambidextrous. Placement of the mechanical safety can be awkward for lefties. Tang safeties work both ways, and most push-button safeties can be reversed, but this is convenience and training; the safety issue comes from being on the wrong side of the action if something goes badly wrong.

Whether falling block or break-open, almost all single-shots are very ambidextrous. This is Uberti’s Courteney stalking rifle in .303 British, on John Browning’s patent.

This is primarily an issue with long guns, because the shooter’s head is close to the action. Revolvers are ambidextrous, and virtually all semiauto pistols eject to the right. Neither are a concern because handguns are fired from arms’ length.

So, how real is the danger? Remote, but it only takes once.  I’ve seen five blowups in my life, mostly on ranges, people I didn’t know, thus from unknown causes. Four resulted in minor injuries…because they were right-handed and shooting right-handed guns. All would have been more serious if experienced by a lefty. The fifth was mine, a right-handed bolt-action, shot from the left shoulder. It was a .270 WSM, and there was a 7mm WSM cartridge in the box. Shouldn’t have chambered, but it did. And fired, swaging a .284-inch bullet down a .277-inch bore. The case head let go, and all the bad stuff came out the right side…like it’s supposed to. I was wearing shooting glasses, so minimal damage, burns and brass fragments on the right side of my nose and a red raccoon ring around my right lens. Absent eye protection, could have been bad!

Savage has long been a stalwart in offering left-hand options, especially in their M110 bolt-action line. This Colorado bull was taken with a Savage 110 in .30-06, one shot and done.

Look, I’m a gunwriter. Catastrophic failures are unusual, uncommon, unlikely. Of course, I shoot right-handed guns off my left shoulder. Good eye protection (and maybe a bit more caution in inspecting ammo) mitigates the risk, but it should not be altogether ignored. Wife Donna is also left-handed and (still) left-eye-dominant. Our personal guns are mirror-image left hand or ambidextrous. She doesn’t do this stuff for a living, so her exposure to right-hand long guns is minimal. The kids are all right-handed and have their own right-handed guns. They can also shoot my “almost ambidextrous” right-hand-eject guns, but they don’t shoot our mirror-image guns from the wrong side.

A friend was a dental surgeon, left-handed and commonly shooting right-hand bolt-actions (like so many lefties). Figuring his hands and right eye were worth a lot more than mine, I convinced him to switch to left-hand actions. I try to do the same with friends who have left-handed kids coming up, usually with success. Give it just a little of thought, and it makes sense: Why accept any unnecessary risk?

In recent years, Ruger has become a strong bastion for left-hand shooters. This left-hand 10/22 is the first-ever mirror-image left-hand semiauto .22.

I don’t actually whine about availability of true, safe-as-can-be left-hand guns, because there are so many more than ever before. In the old days, it was common to switch bolt handles and reverse rotation on bolt-actions. This simplified and speeded operation, but did nothing about the safety issue. Today we have mirror-image bolt-actions from Browning, CZ, Ruger, Savage, Weatherby, and more. John Browning’s bottom-eject slide-action shotgun has been around for a century, variously manufactured by Browning, Ithaca, and Remington. Benelli, Franchi, and Winchester offer mirror-image semiauto shotguns. Ruger now has a mirror-image left-hand 10/22, and Browning still offers the bottom-eject SA22, another John Browning design. There are break-open and falling-block single-shots, and plenty of break open doubles (over-under and side-by-side). Heck, there are even several options for mirror-image ARs. Truly ambidextrous lever-actions are scarce, as are classic control-round-feed bolt-actions, certainly on an affordable basis, but the selection is there.

So far, none of our grand-kids have turned up left-handed, and we haven’t identified cross-eye dominance. Odds are, we’ll have to cross one of those bridges. If we do, and they show interest in shooting, this is the selection of safe and sensible firearms for them. It’s not all that bad!

USE ENOUGH GUN…For All Game

The phrase was made famous by author Robert Ruark (1915-1965). Actually, his memory, because Use Enough Gun is a posthumous collection. Naturally, we assume the admonition applies to large and dangerous game.

By

Craig Boddington

The phrase was made famous by author Robert Ruark (1915-1965). Actually, his memory, because Use Enough Gun is a posthumous collection. Naturally, we assume the admonition applies to large and dangerous game. So, let’s be clear: This story is not about animals that might gore, trample, bite, or eat you.

The greater kudu is a large African antelope, not as big as fully mature elk, but similar in size to a three-year-old five-point bull. Like elk, shots can come at any range. “Enough gun” at 200 yards is one thing, and quite another at twice that distance.

I’ve written those articles (and entire books), but that’s a simple subject. Most African jurisdictions have game laws that tell us what constitutes “enough gun.” In some countries, these are broad, such as “minimum .375 for all dangerous game.” Other areas have more specific rules, sometimes including minimum energy standards. Rather than guidelines, these are enforceable statutes. We can disagree and exceed the standards, but if our chosen rifles and cartridges don’t meet the minimums, we’re breaking the law.

Most US states that allow rifle hunting have a minimum legal caliber. Today, thanks to the widespread popularity of the AR platform, most jurisdictions now allow .223s, at least for deer. Some elk states maintain a higher standard but in most areas, we can now legally hunt deer and wild hogs with .22 centerfires.

“Enough gun” for dangerous game is subject to much debate but is simplified by minimum standards in most African jurisdictions. Widespread belief is the .375 H&H is the usual legal minimum, but it’s more commonly the European equivalent 9.3mm (.366-inch), with either the 9.3x74R or 9.3×62 Mauser usually legal.

On mature bucks and big boars, I’m not convinced this is a great idea, but many of us do it (me included). Light recoil and accuracy make shot placement easy. For brain and neck-shot specialists, the .223 is plenty of gun, and it doesn’t much matter what bullet is chosen. Folks like me, who prefer body shots, are better served by tough, heavy-for-caliber bullets designed for larger game.

Still may not be the best choice. Entrance holes are tiny and exits are unlikely. On larger deer, definitely on hogs, my experience is recovering game shot with .22 centerfires requires more tracking…and there isn’t much trail to follow.

This Texas hog was taken with a brain shot from a little .22 Hornet. Definitely not enough gun, but careful close-range hunters who specialize in brain shots can be a bit more flexible in cartridge choices.

Whether you’re one of the guys who “only does brain shots,” or, like most of us, you usually take the biggest, surest chest shot, when hunting big game with .22 centerfires the bottom line is the same. You must get close. In the first instance, because the head shot is a tricky target; 100 yards is a long brain shot. In body shots with .22 centerfires, you don’t have much bullet energy anyway, and you need all you have. Faster cartridges like the .22-250 offer more range, but when I hunt deer with a .223 I figure about the same 100-yard maximum. 

Now, it’s impossible to quantify exactly how much gun is “enough.” No two shots are exactly alike, with nuances of angles, distances, shot placement, and bullet performance. There are no absolutes. Ideal shot placement—with a bit of luck—may mask inadequacy…until it doesn’t. And the reverse: Make a bad shot, and one’s natural impulse is to blame the cartridge or bullet. There’s no precise formula, but our vast array of cartridges offers plenty of good choices.

Boddington and Zack Aultman with a Georgia hog, rolled with a body shot from a .22 centerfire AR. Although many use .223s for hogs, this is a bit of a false reading: .22 centerfires aren’t enough gun for body shots on big hogs…and this isn’t a very big hog!

Recognizing “enough gun” for dangerous game may be the easiest of all. Nobody takes long shots at big bears or buffaloes, so there’s little concern about trajectory or residual energy. What you start with better be enough. Everything else is more difficult, especially with today’s fascination with shooting at longer ranges. We really need to think about two criteria: Enough velocity, energy, and bullet weight for the close shot we might get; and enough for the long shot we might want to take. These are not exactly the same.

In North America, elk is a major animal that sparks the “enough gun” debate. Boddington used a .270 to take this New Mexico bull, very cleanly with one shot. The .270 is the lightest cartridge he has used for elk, but believes the faster 6.5mms are enough gun…but not at longer ranges.

I like the 6.5 Creedmoor, but I don’t credit it with magical powers. Its 140-grain bullet is not heavy, and its 2700 fps velocity is not fast. Past 300 yards it starts to drop quickly…as does residual energy. A young writer friend who did credit the Creedmoor with magical properties was convinced it’s a 400-yard elk cartridge. At that distance, his elk was wounded and lost. Sometimes we get away with folly, sometimes we don’t, but the Creedmoor is well below the line for elk-sized game at longer ranges.

Boddington used his .264 Winchester Magnum to take this excellent Wyoming mule deer. Ballistically identical to the 6.5 PRC, faster 6.5mms are ideal for deer-sized game at any sensible range, but perhaps a sound minimum for elk-sized game, and not at extreme range

Ringing steel with the Creedmoor at 1000 yards is easy and fun, but that isn’t the same as shooting at game. The steel target doesn’t care how hard or soft the strike; it’s going to ring. My longest shot on game with a Creedmoor was a whitetail at 325 yards. On deer-sized game, the Creedmoor has power and performance beyond that, but you must do things right. We mis-ranged the buck, adjusting for 300 yards vice 325. Doesn’t sound like much, but I needed two more clicks up and hit the buck low. The rangefinder probably caught an unseen branch, not uncommon. I corrected, held higher and hit him again. A flatter-shooting cartridge would have eliminated an almost-miss.  

With perfectly steady position, John Stucker is about to shoot a zebra at 400 yards with his Christensen 6.5 PRC with 143-grain ELD-X.

 I like the awesome downrange performance of the 6.5mm’s long, aerodynamic bullets, so I’m becoming a fan of the 6.5 PRC. With 140-grain bullet at 3000 fps, it is 300 fps faster than the Creedmoor, delivering more energy and shooting much flatter. There’s no magic in this formula; the old .264 Winchester Magnum does the same, as do the 6.5/.284 Norma and the new 6.5 Weatherby RPM. I have a good .264, but the 6.5 PRC, with modern case design, is better-suited for today’s longer, heavier “low drag” bullets. Although I’m new to the 6.5 PRC, I’ve taken a lot of game with the .264: Deer, sheep, goats, African plains game. I thought I had a pretty good idea of the size of game this level of 6.5mm was “enough gun” to handle. For sure, I considered it elk-adequate to considerable distance, if not extreme range.

B oddington and John Stucker with Stucker’s Burchell’s zebra, taken at 400 yards with a 6.5 PRC. Maybe it would have worked perfectly if the first shot had been two inches left…and maybe not. Collective summation: Not quite enough gun for large, tough animals at that distance

My buddy John Stucker has a Christensen Ridgeline in .300 Winchester Magnum, accurate, powerful, a wonderfully versatile rifle. Last year in Georgia, John used a borrowed 6.5 PRC and flattened a big-bodied buck in its tracks. He liked the cartridge so much that he bought another near-identical Christensen in 6.5 PRC.

This year we had a South African plains game hunt planned with Carl van Zyl’s John X Safaris. Stucker had an obvious choice in his Christensen .300. However, he was focused on smaller antelopes often taken at longer ranges: Vaal rhebok, klipspringer, steenbok, mountain reedbuck, nothing “big” on his wish list. He decided to take his 6.5 PRC and, for sure, I agreed 100 percent.

Boddington’s son-in-law, Brad Jannenga with a nice axis deer (similar in size to mule deer), taken with an old .300 Savage lever-action. For deer-sized game there are dozens of adequate cartridges. On larger game, more thought should be given to cartridge adequacy

Africa’s pygmy antelopes often mean difficult shooting. Obviously, the 6.5 PRC was plenty of gun, and Stucker was on a roll. With great shooting and good luck, he was done early, so he added zebra and maybe a kudu to his list. An average kudu bull is much the same size as maybe a youngish five-point or raghorn elk. At possibly 800 pounds, a zebra is as big, and as tough, as a big bull elk. John’s .300 would have been perfect, but we had no reason to question his 6.5. His PH, “Stix” Hoole, an astute “gun guy,” was also in agreement. Should be fine.

Left to right: 6.5×55 Mauser, 6.5 Creedmoor, .260 Remington. These 6.5mms are almost identical in ballistics: 140-grain bullet at about 2700 fps. They are awesome for deer-sized game, but adequate for elk only at closer ranges…with excellent shot placement.

Here’s where nuances of shot placement, distance, and luck come into play. John got a shot at an older, big-bodied kudu bull with terrible horns, a “management” bull. One 143-grain ELD-X crumpled the bull, perfect shoulder shot at 380 yards. We were all stoked and gratified; the 6.5 PRC was obviously plenty of gun.

Unfortunately, the zebra told a different story. John’s first shot was just over 400 yards. The way folks tell it these days, that’s not far, right? From a steady position with data well dialed-in, very do-able. However, from muzzle energy of 2782 ft-lbs, residual energy at 400 yards was 1800. Again, nuances. Maybe the animal was quartering a few degrees, or maybe the first shot was a couple inches too far forward. Whatever. The first shot on the shoulder didn’t do the job. Nor did additional shots, apparently perfectly placed despite increasing distance. The animal went down, but when we approached it jumped up and needed a close-range finishing shot.

Faster 6.5mms flatten trajectories and deliver more downrange energy. These 6.5mms all deliver 140-grain bullets at about 3000 fps, left to right: .264 Winchester Magnum, 6.5-.284 Norma, 6.5 PRC, 6.5 Weatherby RPM. All are fully adequate for elk, but their relatively light bullets suggest caution at longer ranges

I can’t tell you how many more feet per second in velocity, how many more foot-pounds of energy, or how many more grains of bullet weight we should have had for that zebra. Nor, precisely, can anyone else. I don’t even know for absolute certainty that we didn’t have enough. Maybe if the first shot had been two inches farther left we’d still be congratulating each other on a great shot, made with a perfect choice of cartridge and bullet. But I don’t think so, because the lesson isn’t new. The last time I used my .264 in Africa (140-grain bullet at 3000 fps, so ballistically the same as Stucker’s 6.5 PRC), I remember thinking that larger, tougher antelopes—and zebra—traveled a bit farther with well-placed hits than would have been the case with 7mm or .30-calibers with heavier bullets. The problem with using “enough gun” is that nobody can say exactly what that is for various sizes and types of game. It only becomes obvious when you don’t have quite enough!

NEW (COVID) CARTRIDGES

By

Craig Boddington

New cartridges keep gunwriters going! Apparently, they keep manufacturers going, too. Too many times I’ve said that we have plenty of cartridge, but they keep coming.  New cartridges create buzz, which creates demand, which creates sales…and so forth.

During nearly two years of Dread Virus, demand hasn’t been an issue! Demand for firearms and ammunition, has been unprecedented, with many manufacturers are struggling to keep up. Lengthy back-orders prevent focus on new products. A small side effect to the long pandemic: In 40 years I have never seen a two-year period with such a slow trickle of new stuff! I haven’t even seen some of the new cartridges, but some have caught my eye!

AR CARTRIDGES

6mm Creedmoor, 6.5mm Creedmoor, 6.5mm PRC, 6.8 Western, 28 9480Nosler, .300 PRC.
Left to right: 6mm Creedmoor, 6.5mm Creedmoor, 6.5mm PRC, 6.8 Western, 28 9480Nosler, .300 PRC. Not all of these are brand-new, but all are creating a lot of buzz among modern rifle shooters.

For decades the AR15 action was chambered almost exclusively to the 5.56x45mm (.223 Remington). During the past 20 years, the platform became amazingly popular among civilian shooters, with new cartridges developed to wring just a bit more performance. The problem: The action is sharply limited in cartridge length, Cases fatter than the .223 can be chambered to ARs, but either a larger bolt face must be used…or the rim must be rebated (smaller diameter than the base). Both solutions are commonly used with new AR cartridges. In many cases, cartridge-specific magazines must be used.

Heavier 5.56mm bullets with better long-range performance offer a partial solution. Our military started with a 55-grain bullet, switching to 62 grains in 1980. Today, we often use 5.56mm bullets up to 80 grains and more. Federal’s .224 Valkyrie offers better performance than the 5.56 with heavier bullets, and the .22 Nosler (with more case capacity) is faster. I haven’t warmed up to either, simply because the .223 still does most of what I need an AR to do, but both are probably “better” cartridges.

custom 6mm ARC
A custom 6mm ARC, used on a prairie dog shoot in Wyoming in July 2021. The 6mm ARC probably makes the most sense in an AR platform! It’s an impressive little cartridge, extremely accurate and prairie dog-capable to 400 yards and beyond

I was at the Remington seminar in 2002 when the 6.8 SPC was introduced. The 6.8 SPC (.277-inch diameter) is definitely a better deer/hog cartridge than the .223, but that’s another bandwagon I never jumped on. The .300 AAC Blackout, standardized by SAAMI in 2011, has become surprisingly popular, in part because of its performance suppressed, (with subsonic loads). Based on the 5.56mm case shortened and necked up to .30-caliber, it has been adopted by some of our special operations forces. I find it marginal for deer, and not enough gun for hogs. To me, a far better solution is the 6.5mm Grendel, which takes advantage of longer, more aerodynamic 6.5mm bullets. Designed by Bill Alexander back in 2003, the Grendel isn’t new, but it’s a great little cartridge.

In a favorite deer stand with a new Bergara in .300 PRC. Absent conventions and most events during the pandemic, it wasn’t until hunting season 2021 that Boddington had a chance to try out some of the newest rifles and cartridges.
In a favorite deer stand with a new Bergara in .300 PRC. Absent conventions and most events during the pandemic, it wasn’t until hunting season 2021 that Boddington had a chance to try out some of the newest rifles and cartridges.

At the other end of the spectrum, the .450 Bushmaster (straight case with rebated rim) packs about all the power one can wring out of an AR platform…at least at close range. It meets all requirements in the states that allow a “straight wall” centerfire cartridge (in lieu of shotguns). It’s one of the best choices to hunt black bear with an AR, and thus plenty powerful enough for deer and hogs. The only real drawback: Performance is similar to the .45-70, thus generating more recoil than many hunters are comfortable with.

John Stucker
John Stucker used a Springfield Waypoint in 6.5mm PRC to take this old, downhill Georgia buck. The 6.5 PRC is a fine cartridge for deer-sized game under almost any conditions.

Which leads us to two new “AR cartridges” of the pandemic era. Hornady’s 6mm ARC (Advanced Rifle Cartridge) case is similar to the 6.5mm Grendel, but technically based on the .220 Russian. At first glance, I had little interest in the ARC, but changed my tune when I had a chance to use it on a prairie dog shoot last July. With its short, fat case, it’s efficient and allows use of new heavy 6mm bullets. The 6mm ARC propels a 108-grain bullet at 2750 fps. Grendel magazines and bolt face are compatible, and the ARC outperforms the Grendel at long range. I was shooting it in a bolt-action, and was impressed by the ARC’s accuracy and performance, no problem smacking prairie dogs out to 400 yards.

Georgia whitetail
This Georgia whitetail was Boddington’s first game with a .300 PRC. He admits to overkill with a 225-grain ELD-X Match…but the buck went down in his tracks.

Most “AR cartridges” have been designed for potential military use. Winchester’s .350 Legend, introduced in 2019, is an exception intended specifically to meet the “straight wall cartridge” criteria in traditional shotgun states. Propelling .35-caliber bullets of 160 to 180 grains at 2100 to 2200 fps, the Legend is ballistically similar the great old .35 Remington. However, the Legend is legal for deer under “straight wall” rules, and the bottleneck .35 Remington is not.

The Legend’s .357 diameter is a bit odd: Undersize for traditional .358-inch rifle bullets; and oversized for 9mm pistol bullets (usually .355-inch). Oversized bullets, even a thousandth, are not a good idea. Slightly undersize bullets aren’t like to group the best, but cause no pressure issues. 9mm pistol bullets are being loaded in .350 Legend for inexpensive practice ammo. Accuracy isn’t great in my rifle, but I’ve seen no evidence of keyholing.

Boddington’s friend, Zack Aultman
Boddington’s friend, Zack Aultman, is almost always certain to have something “interesting” in the gun rack at his Georgia deer camp. The first three, from left, are a Bergara and Alterra, both in .300 PRC; and a Springfield Waypoint in 6.5mm PRC, new cartridges in very new rifle platforms.

I bought a Mossberg Patriot bolt-action in .350 Legend. I haven’t used it for deer (yet), but I’ve found it effective on hogs. It is NOT a long-range cartridge! I think of it as a 200-yard deer cartridge, with mild recoil. Performance is in spirit with the straight-wall-cartridge concept, and accuracy beats what most slug guns can deliver!

HUNTING AND TARGET CARTRIDGES

There haven’t been many of these, either! The 6.5mm PRC (Precision Rifle Cartridge) was slightly pre-pandemic. I almost missed this one because I have a good .264 Winchester Magnum I’m not willing to part with.

Ballistics are similar to the old .264, 140-grain bullet at about 3000 fps. However, the PRC uses a modern, unbelted case, based on the .375 Ruger case shortened. The short case allows it to be used in short actions with today’s longer, heavier, super-aerodynamic 6.5mm bullets. I haven’t abandoned my .264, but I’ve been using the 6.5mm PRC it in a Springfield Waypoint. Awesome rifle, with marvelous out-of-the-box accuracy.

Boddington on the bench
Boddington on the bench with a new Bergara in .300 PRC. The cartridge was impressive. So was the rifle, amazing out-of-the-box accuracy at a very modest price.

More recent is its big brother, the .300 PRC. I’m kind of in the same boat there: I have good, accurate rifles in several fast .30s and don’t need another. The .300 PRC was built for long-range accuracy with today’s long, heavy bullets and faster-twist barrels. It uses the full-length .375 Ruger case (2.5 inches). This allows it to be used in s.30-06-length actions with the most modern bullets.

Now and then I go to Georgia to hunt at friend Zack Aultman’s place, with a great range right outside his door. Being a long-gone rifle nut, he’s always got something new! We had a Waypoint in 6.5mm PRC, and both an Alterra and a Bergara in .300 PRC.

John Stucker checking zero
John Stucker checking zero with a Springfield 2020 Waypoint in 6.5mm PRC, prior to a Georgia deer hunt. Both Boddington and Stucker have taken whitetails with Springfields in 6.5 PRC, a great deer cartridge at any sensible range.

This was my first exposure to the .300 PRC! Neither rifle was more accurate than my fast .30s. However, the twist is faster, and both produced tight groups with 212, 225, and 230-grain bullets. A fast .30 with extra-heavy bullets isn’t needed for Southern whitetails…but it worked just fine. As with my .264, I’m not prepared to replace my magnum .30s…but if I were starting out from scratch, I’d give serious thought to a .300 PRC.

Not exactly new, but slow to catch on has been the 6mm Creedmoor, a simple necking down of the popular 6.5mm Creedmoor. With the short Creedmoor case, it is able to handle 6mm bullets up to at least 108 grains in a short action (with faster twist barrel). Because of accuracy and light recoil, it has become popular in long-range competition. Ballistically similar to the .243, I have described the 6mm Creedmoor as the “best” 6mm cartridge.

The Nosler family of proprietary cartridges has grown! The 26, 27, 28, 30, and 33 Nosler are all based on the Remington Ultra Mag (RUM) case shortened to 2.590 inches, allowing use in standard-length actions. Across the board, cartridge overall length (COAL) is specified at 3.340 inches, with shoulders moved as needed to preclude a larger caliber from being chambered in a smaller caliber chamber. I haven’t tried them all but, depending on your preferences in bullet diameter, plenty of choices! So far, I think the 28 Nosler has been the most popular. However, the 27 Nosler is the fastest cartridge using the .277-inch bullet. With faster-twist barrels, it is able to take advantage of the heaviest “low drag” .277-inch bullets just now becoming available.

.350 Legend
Despite its pandemic debut, the mild-kicking .350 Legend was quickly embraced in the formerly shotgun-only states that allow “straight-wall” centerfires for big game. Although all ammo is scarce right now, quick acceptance has led to a robust assortment of factory loads.

Winchester’s 6.8 Western is unabashedly all about such bullets! I’m a longtime .270 Winchester fan, and have had numerous flings with the .270 WSM and Weatherby. Great cartridges all, but traditional bullet weight has been limited to 150 grains, behind the times with today’s super-aerodynamic long-range bullets. Standard .270 rifling twists have always been 1:10, maxing out at about 150 grains. The 6.8 Western came out of the starting gate with bullets from 160 to 175 grains, rifles barreled with 1:8 twists.

The case is nothing new, the .270 WSM case shortened enough so the new long bullets can be used in a short bolt-action.  The 6.8 Western is still so new that I haven’t yet seen a rifle. Hell, in order to get a cartridge to photograph I had to buy a box of ammo! I don’t have a .270 Winchester I’m willing re-barrel in order to use the new bullets. So, I’m having a 6.8 Western built. I’ll let you know how I like it!

In Praise Of Older Rifles By Craig Boddington

In this Wholesale Hunter Blog Craig Boddington discusses older rifles and compares the quality and value of older rifle Vs newer ones.

Crown recut: This inexpensive Remington .30-06 turned out to have a lop-sided crown, right group. We re-cut the crown at the range, a simple process (if you have the tools). Using the same factory ammo, it turned into a real tack-driver, center group.

Modern factory rifles are amazing, complete, reliable, and more accurate than ever before. In today’s dollars, basic bolt-actions, are more inexpensive than ever before. There are dozens of good models under $600, and some excellent new bolt-actions available for little more than half that. Almost invariably, most basic bolt-actions wear synthetic stocks, free-floated barrels, rust-resistant metal, and push-feed actions. No problem, they work and shoot well. And, of course, I shoot them, hunt with them, and write about them.

This custom .270 Winchester by Joe Balickie, on a left-hand Carl Gustav action, groups pretty well with everything…but it really likes the 130-grain GMX, top right. Naturally, that’s what Boddington uses to hunt with this rifle
This custom .270 Winchester by Joe Balickie, on a left-hand Carl Gustav action

However, my personal tastes run much more to good old walnut, mated and carefully fitted to blued steel. These features are available in new rifles of all action types. But you’ll pay more for them. It comes down to manufacturing costs. Synthetic is less costly than wood…and requires less hand-fitting and final finishing. Other action types, whether lever, semiauto, etc., are generally more expensive than basic bolt-actions; and controlled-round-feed (Mauser-type) bolt-actions are costlier than push-feed actions. Again, manufacturing costs: Number of parts, raw materials, and both machining and assembly time. Just the way it is!

A vintage .300 Savage on the California Central Coast. Rifle choices are somewhat regional; the Savage 99 was extremely popular on the West Coast and are seen on most used-gunracks. Used Marlins may be more common in the Upper Midwest.
A vintage .300 Savage on the California Central Coast. Rifle choices are somewhat regional; the Savage 99 was extremely popular on the West Coast and are seen on most used-gunracks. Used Marlins may be more common in the Upper Midwest.
Continue reading “In Praise Of Older Rifles By Craig Boddington”

HOW ABOUT A .30-30? By Craig Boddington

It’s often said that the .30-30 Winchester has “taken more deer than any other cartridge.” Axioms like this are hard to prove and I can’t prove this one. Over the years, I’ve taken deer with numerous different cartridges…but only a handful with a .30-30.

Even so, I think it’s probably true. Introduced in 1895, the .30-30’s original 160-grain load barely hit 2000 feet per second, slow by today’s standards…but faster than any black powder cartridge. Compared to the large-cased cartridges of the day, the .30-30 was a tiny little thing. Early users quickly learned that its new smokeless propellant harnessed a lot of power and flattened trajectory. The .30-30’s also-new jacketed bullet penetrated well and offered a new dimension to bullet performance: Expansion.

In the euphoria over this newfound velocity the .30-30 was often used for large game, elk, moose, and even big bear. Undoubtedly, it still is, and with perfect shot placement (and, in its traditional lever-action platform, with fast repeat shots) it will get the job done. However, in 1895 and today, deer are America’s most widespread and popular big game. The .30-30 was quickly found extremely effective on deer-sized game…and remains so today. No one can estimate how many millions of deer have fallen to .30-30s. Winchester has made 7.5 million Model 94s, most of them in .30-30, and millions still in use. Add in hundreds of thousands of lever-action .30-30s from Marlin, Mossberg, and Savage; a few slide-actions, and a major sprinkling of single-shots. The .30-30’s rimmed case is probably best-suited to traditional tubular-magazine lever actions, but it was chambered to a surprising number of early bolt-actions!

Bruce Duncan with a big Idaho tom mountain lion and his battered Model 94 .30-30 carbine, short, light, easy to carry, for generations the odds-on choice for houndsmen.

Despite the many cartridges that are faster, shoot flatter, and harness more power, the .30-30 remains among our best-selling cartridges. Perhaps more surprising, it remains among the top cartridges in reloading die sales. Admittedly, this is partly because there are so many .30-30 rifles out there. However, I think it’s also partly because the .30-30 remains a useful hunting cartridge, with relatively light recoil and deer-killing efficiency.

Continue reading “HOW ABOUT A .30-30? By Craig Boddington”

Roberts .257: A Quarter-Bore Worth a Comeback

The enclosed blind was warm, and it was still early; I was unlikely to see anything for a while. Truth is, I was wool-gathering… and when I glanced up there was a very large black boar standing broadside near the feeder. Oops! I raised the rifle, slowly got the barrel outside the window, and took a rest.

The distance was about a hundred yards; without further thought, I centered the crosshairs on the shoulder, a third up from the brisket. The shot felt good, but the pig lurched away, instantly lost behind some cedars. Now I needed to think about this. I’d taken the shot with a .257 Roberts and 117-grain Hornady SST. Hindsight being perfect, steady and at that distance, I could just as well have taken a head or neck shot, but I’d instinctively gone for my comfort zone, the shoulder shot, without considering that this was not a big gun for a large pig.

Well, done was done, and something else might come in. I waited until about 15 minutes after sundown, turned the scope down low, and went to check. The boar was every bit as big as I’d thought; he’d gone about 20 yards and was stone-dead. Impressive!

Wild Boar, Wild Hog, Texas Hunting
This big Texas hog took a 117-grain SST on the shoulder from the .257 Roberts and traveled about 20 yards.

Continue reading “Roberts .257: A Quarter-Bore Worth a Comeback”

Loaded for Hunting Wild Boar

America’s population of feral hogs is now estimated at around nine million, growing and seemingly unstoppable. With crop and property damages running into the billions of dollars, pigs are clearly a plague for many farmers; what’s more, their status as a non-native invasive species means that we don’t yet know the long-term impact they’ll have on native fauna and flora. That said, hunting wild boar is a boon for hunters: They are our second-most numerous “big game animal” after the whitetail deer.

hunting wild boar in California .270 Winchester
hen I was a bit younger this is the way we usually recovered our pigs, and a big boar made quite a load! This boar was taken with a .270 Winchester, always an exceptional choice, and plenty powerful enough for any pig that walks.

Pigs are intelligent and prolific, and I’m not at all convinced that conventional hunting techniques can control their numbers. But that’s above my pay grade. As a game animal, they provide excellent pork, are fun and surprisingly challenging to hunt, and can often be pursued year-round. They’re tough, and under the right (or wrong) circumstances they can be dangerous. I like to hit them hard, with plenty of bullet and enough gun.
Continue reading “Loaded for Hunting Wild Boar”

Turkey Time!

Let me be perfectly clear: I am not an expert turkey hunter! No way am I going to give you calling tips or turkey hunting tips. I bumble along, and fortunately we have a lot of turkeys to hunt these days.

Strutting Turkey in the field
With the head tucked down this is a normal presentation when a gobbler is strutting, but this is a poor shot; better to wait a few seconds until the head and neck are extended!

So, important admissions made, I’m pretty good at shooting turkeys if and when I get a chance. Over the years—and I can go back about 50 years—I’ve hunted all the varieties, and I’ve hunted turkeys in a lot of places. My opinions have shifted over time, and may shift again. In part this is because, as turkey hunting has exploded, our turkey guns and turkey loads keep getting better.

Today I am convinced of three things: To anchor turkeys consistently you need good chokes, you need good shells, and sights are a really great idea.
Continue reading “Turkey Time!”